UNBRICK PHONE WITH ODIN (GALAXY Y ONLY).

                     UNBRICK GALAXY Y PROCESS:

REQUIREMEMTS:

1.ODIN

2.GALAXY Y FIRMWARE.

3.GALAXY Y USB DRIVERS

                                         FOLLOW THE STEPS CAREFULLY.

1.GO TO DOWNLOAD MODE IN ODIN (BY FIRST SWITCHING OFF THE MOBILE,  PRESS VOLUME DOWN BUTTON+POWER BUTTON+MIDDLE BUTTON(HOME  BUTTON)).

2.CONNECT UR USB IN UR PC.

3.OPEN ODIN.

4.IF UR PHONE IS CONNECTED TO ODIN IT WILL SHOW A BLUE POP UP AS BELOW.




5.IF UR PHONE IS NOT GETTING CONNECTED THEN DOWNLOAD GALAXY Y USB  DRIVERS (EVEN AFTER INSTALLING DRIVERS IF UR PHONE IS NOT GETTING  CONNECTED THEN CHANGE THE USB OR TRY IN UR FRIENDS' SYSTEM)

6.AFTER UR PHONE GETS CONNECTED EXTRACT THE FIRMWARE WHICH U  DOWNLOADED IN UR PC.

7.THEN IN ODIN THERE WILL BE A BUTTON "pit" ,THE FIRST OPTION CLICK THERE  THEN SELECT THE FOLDER WHERE U EXTRACTED THE FIRMWARE. CLICK ON THE  FILE HAVING THE EXTENSION AS ".pit".

8.SELECT BOOT AND SELECT THE FILE WITH NAME "BOOT_S5360DDK1_REVO5"(OR   SOME SIMILAR NAME)

9.SELECT PDA AND SELECT THE FILE "PDA_S5360DDKK1" (OR SOME FILE WITH      SIMILAR NAME")

10.SELECT PHONE AND SELECT THE FILE "MODEM_S5360DDKK1"(OR SOME FILE            WITH SIMILAR NAME.)

11.SELECT CSC AND SELECT THE FILE "GT-S5360-MULTI-CSC" (OR SOME FILE WITH     SIMILAR NAME.)

12.MAKE SURE U HAVE SELECTED AUTO REBOOT AND RESET TIME IN TOP LEFT           SIDE AS IN IMAGE.

13.ATLAST SELECT REBOOT... UR DONE.. CONGO.